很遗憾,因您的浏览器版本过低导致无法获得最佳浏览体验,推荐下载安装谷歌浏览器!

智能防腐隔热涂料

联系人: 杨经理
联系电话: 18603087218
联系Q Q: 397597335
企业邮箱: 397597335@qq.com
企业地址: 广东省佛山市顺德区马岗工业区胜江路2号
留言咨询 更多信息
分享:

产品介绍

智能工业保温隔热涂料 

Intellectual Industrial Warm Keeping Heat Insulation Coating

产品说明:Product description:

     瑞佩姆采用当今国际上先进的新型纳米、空心玻璃微珠、真空球、超轻质无机原料,加以高韧性基料复合研制而成的超轻型多用途、隔热保温智能涂料,其综合性能及施工的简易程度、对节能、减排,降耗,低碳、环保具有跨时代的意义。隔热保温智能涂料,能在物体发热高温的状态下、涂层对热源体所散发传递的热量进行有效的拦截、阻隔、不使热能通过涂层传递,始终保持涂层恒温、有效地阻隔热源流失,从而真正达到节能,减排、降耗,低碳,环保、利国、利民,对社会发展作出重大的贡献!
     The ultra light multi-purpose, heat insulation warm keeping intellectual coating of Ruipeimu is made by adopting the internationally advanced novel nano, hollow glass micro ball, vacuum ball, ultra light inorganic raw materials, and high ductility base materials, the product’s comprehensive performance and the simplicity of construction has the cross-era meaning to energy saving, pollution reduction, consumption reduction, low carbon, environment protection. The heat insulation warm keeping intellectual coating can make effective blocking to the heat emitted and transmitted from the heat source under the status of heating and high temperature, but do not allow the heat energy be transmitted through the coating and keep the constant temperature of the coating, which effectively block the loss of heat energy and achieve the effect of energy saving, emission reduction, consumption reduction, low carbon, environmental protection, this benefit the nation and the people and make a great contribution to the social development.

 

产品适用于;工业机械设备、反应釜、高温蒸汽管道、蒸汽锅炉、模具、阀门、冷库丶烤箱、注塑机、热水器丶中央空调管道、太阳能热水器管道、冷水管道等需保温隔热的设备设施。
  2、使用温度:-40℃—300℃。
  3、涂层厚度根据设备温度而制定,一般200℃左右的蒸汽管道,3mm厚涂层表面温度降到80℃左右,5mm厚度表面下降到60℃左右。
  4、节能效果惊人!1个月便可收回投资,大大降低生产成本,提高经济效益,同时降低设备及车间温度,消除事故隐患,改善车间工作环境,提高工作效率,又延长了设备使用寿命,
  5、用量:3mm厚度约需3.L/m2

Applications:

1. The apparatuses requiring warm keeping and heat insulation such as industrial mechanical equipment, reaction pot, high temperature steaming pipe, steaming boiler, mold, valve, cold store, oven, injection machine, water heater, pipe of central air conditioning, pipe of solar water heater, pipe of cold water.

2. Application temperature: -40℃—300℃.

3. The coating thickness hall be determined by the equipment temperature, generally, take the steaming pipe of about 200℃ for example, the surface temperature of 3mm thickness coating will reduce to about 80℃; the surface temperature of 5mm thickness coating will reduce to about 60℃.

4. Amazing energy saving effect: The investment can be recovered in one month, which greatly reduce the cost of production, increase the economic benefit, reduce the temperature of equipment & workshop, eliminate the hidden risk of accident, improve the working environment of workshop, increase the working efficiency, and extend the application life of equipment.

5. Application dosage: 3.L/m2 is required for 3mm thickness.


  6、使用方法:A、清洗干净表面的油污、灰尘(已生锈的表面要先涂刷一层防锈漆),待其干燥;
  B、施工表面的温度为15—60℃左右,空气湿度小于80%,每遍涂抹厚度1—1.5mm,干燥后涂抹下一遍,直至要求的厚度;
  C、应避免设备在涂层未完全干燥固化的情况下进行工作;
  D、施工前先搅拌涂料,不需加水,使用软硬适中的涂料扫子;
  E、光滑的表面,涂抹一遍涂层时不宜过厚,0.5mm即可,干燥后第二遍即可厚涂;
  F、达到使用的厚度、干燥固化后,可涂刷一层透明防尘防水透明光油,既美观又易于日后设备清洁。
  7、包装规格:20L/桶,50L/桶。
  8、储存:密封,存放于阴凉干燥处,储存期一年。

6. Application method:

A. Clean the grease and dirt on the surface (one layer of rust preventing paint shall be coated on the rusted surface), and keep it dry;

B. The best temperature of the construction surface is about 15 to 60℃; the air humidity is less than 80%, the coating thickness per time is 1 to 1.5mm, to start the next pass after dry until obtain the required thickness;

C. Avoid operating the equipment when the coating is not thoroughly dried and solidified;

D. Stir the coating before construction and do not need to add water, apply the coating broom of proper hardness;

E. When coat the smooth surface for the 1st time, do not coat too thick, just 0.5mm is enough; after it turn dry, to make thick coating in the second pass..

F. When achieve the required thickness, and the coating turn dry and solidifying, to brush one layer of transparent varnish of dirt prevention and water proofness, which is beautiful and easy for equipment cleaning.

7. Packing specification: 20 L per barrel, 50L per barrel.

Storage: Tightly closed, store in the dry and cool area, storage period is one year. 

智能防腐隔热涂料


联系人:杨经理

联系电话:18603087218

联系Q Q:397597335

企业邮箱:397597335@qq.com

企业地址:广东省佛山市顺德区马岗工业区胜江路2号

佛山瑞佩姆智能涂料有限公司,专营 智能氧吧 智能自洁涂料 透明玻璃隔热涂料 智能隔热保温涂料 智能隔热防水涂料 智能透明玻璃隔热涂料 智能修痕防水涂料 智能蓄能发光涂料 等业务,有意向的客户请咨询我们,联系电话:18603087218(微信同号)

技术支持:河北集创信息技术有限公司 网站地图 XML


技术支持:河北集创信息技术有限公司 网站地图 XML

本站关键字: 隔热涂料 保温涂料 防晒涂料 玻璃隔热涂料 防晒隔热涂料 防水隔热涂料 保温隔热涂料 工业保温涂料 隔热漆 建筑涂料 环保涂料 涂料 智能涂料


扫一扫访问移动端